CWE-1234—Hardware Internal or Debug Modes Allow Override of Locks
Metadata
名称
Hardware Internal or Debug Modes Allow Override of Locks
描述
System configuration protection may be bypassed during debug mode.
Device configuration controls are commonly programmed after a device power reset by a trusted firmware or software module (e.g., BIOS/bootloader) and then locked from any further modification. This is commonly implemented using a trusted lock bit, which when set, disables writes to a protected set of registers or address regions. The lock protection is intended to prevent modification of certain system configuration (e.g., memory/memory protection unit configuration). If debug features supported by hardware or internal modes/system states are supported in the hardware design, modification of the lock protection may be allowed allowing access and modification of configuration information.